SN65DSI84/SN65DSI84-Q1 DSI to FlatLink Bridge

Texas Instruments SN65DSI84/SN65DSI84-Q1 DSI to FlatLink™ Bridge features a single-channel MIPI D-PHY receiver front-end configuration with four lanes per channel operating at 1Gbps per lane and a maximum input bandwidth of 4Gbps. The bridge decodes MIPI DSI 18bpp RGB666 and 24bpp RGB888 packets. The device also converts the formatted video data stream to a FlatLink™ compatible LVDS output operating at pixel clocks operating from 25MHz to 154MHz, offering a Dual-Link LVDS with four data lanes per link. The SN65DSI84/SN65DSI84-Q1 is well suited for WUXGA 1920 x 1200 at 60 frames per second, with up to 24 bits-per-pixel. Partial line buffering is implemented to accommodate the data stream mismatch between the DSI and LVDS interfaces. The Texas Instruments SN65DSI84-Q1 devices are AEC-Q100 qualified for automotive applications.

Rezultāti: 2
Atlasīt Attēls Detaļas Nr.
 Raž.
Apraksts Datu lapa Pieejamība Cenas noteikšana (EUR) Atlasiet rezultātus tabulā pēc vienības cenas, pamatojoties uz daudzumu.
Daudz. RoHS ECAD modelis Tips
Draiveru skaits
Uztvērēju skaits
Datu pārraides ātrums
Ieejas tips
Izvades tips
Barošanas spriegums - maks.
Barošanas spriegums - min.
Minimālā darba temperatūra
Maksimālā darba temperatūra
Montāžas veids
Iepakojums / korpusa
ESD aizsardzība
Kvalifikācija
Iepakojums

Texas Instruments LVDS saskarnes IS Auto Sngl Ch MIPI DS I to SnglLink LVDS
Datu lapa
943Ir noliktavā
MouseReel ir pieejams
Min.: 1
Vair.: 1
Rullis: 1 000

DSI to Dual-Link LVDS Bridge 8 Driver 4 Receiver 1.078 Gb/s MIPI D-PHY LVDS 1.95 V 1.65 V - 40 C + 105 C SMD/SMT HTQFP-64 AEC-Q100 Reel, Cut Tape, MouseReel
Texas Instruments LVDS saskarnes IS MIPI DSI bridge to F latlink LVDS singl
Datu lapa
1 753Ir noliktavā
MouseReel ir pieejams
Min.: 1
Vair.: 1
Rullis: 2 500

DSI to LVDS Bridge 1 Driver 1 Receiver 1 Gb/s CMOS, LVDS LVDS 1.95 V 1.65 V - 40 C + 85 C SMD/SMT NFBGA-64 With ESD Protection Reel, Cut Tape, MouseReel