EV-DPS-PWRBDx Power Boards

Analog Devices EV-DPS-PWRBDx Power Boards are power attachments for the LT8740 device power supply (DPS) evaluation boards. Each power board has two output voltage rails: a positive output voltage (VPOS) and a negative output voltage (VNEG), with voltage levels depending on the variant. Each rail can deliver a 20A current. These Analog Devices EV-DPS-PWRBDx power boards utilize the LTC3871 PolyPhase® Controller. Each variant uses two LTC3871 ICs, one generating VPOS and the other generating VNEG. On the EV-DPS-PWRBD1Z and EV-DPS-PWRBD4Z variants, the LTC3871, which provides VPOS, is configured as a buck. For the EV-DPS-PWRBD5Z variant, the LTC3871, which generates VPOS, is configured as a boost. The LTC3871, which provides VNEG, is configured as an inverting buck/boost for all three variants. The inverting buck/boost receives input power from the VPOS for the EV-DPS-PWRBD1Z and EV-DPS-PWRBD4Z variants and VIN for the EV-DPS-PWRBD5Z variant.

Rezultāti: 3
Atlasīt Attēls Detaļas Nr.
 Raž.
Apraksts Datu lapa Pieejamība Cenas noteikšana (EUR) Atlasiet rezultātus tabulā pēc vienības cenas, pamatojoties uz daudzumu.
Daudz. RoHS Produkts
Tips
Ieejas spriegums
Izejas spriegums
Rīks ir paredzēts novērtēšanai:
Sērija
Analog Devices Barošanas pārvaldības IS izstrādes rīki LTC3871 Power Attach for LT8740 DPS Brd
Datu lapa
5Ir noliktavā
Min.: 1
Vair.: 1

Evaluation Boards Voltage Regulator - Switching Regulator 20 V to 26 V - 17.5 V, 17.5 V LT8740 LT8740
Analog Devices Barošanas pārvaldības IS izstrādes rīki LTC3871 Power Attach for LT8740 DPS Brd
Datu lapa
5Ir noliktavā
Min.: 1
Vair.: 1

Evaluation Boards Voltage Regulator - Switching Regulator 12 V to 24 V - 5.5 V, 9 V LT8740 LT8740
Analog Devices Barošanas pārvaldības IS izstrādes rīki VPOS=+30V; VNEG=-5V; IDUT = 20A
Datu lapa
5Ir noliktavā
Min.: 1
Vair.: 1

Evaluation Boards Voltage Regulator - Switching Regulator 20 V to 26 V - 5 V, 30 V LT8740 LT8740